Page 1 of 1
Using Salvage on Items
Posted: July 4th, 2015, 4:42 pm
by Invictus
Trying to use /mt use for salvage on an item and its not working. Any tips? I have tried with and without the (100), tried different items. Wondering how I can go about this.
Re: Using Salvage on Items
Posted: July 4th, 2015, 6:00 pm
by HellsWrath
Salvage names can't be used.
If you have a Peridot Electric Staff and you try "/mt usei Peridot Electric Staff" it won't work.
If you "/mt usei Electric Staff" it will.
Master of Design
Salvage names changed from "Salvaged Type" to "Type Salvage" for technical reasons.
Mule TradeIt used to accept Salvage names as well, now it does not as a result of the name changes.
You may be able to do it using Expressions
http://www.virindi.net/wiki/index.php/Meta_Functions
Re: Using Salvage on Items
Posted: July 5th, 2015, 3:47 am
by Invictus
thx hell I'll look into. Been trying to figure out how to apply Ivory to colo rings to hand off to mules but no luck thus far.
Re: Using Salvage on Items
Posted: July 9th, 2015, 8:25 am
by Dmdtt
you can add ivory to empyrean rings just fine with the command /mt usep Salvage on Empyrean Ring you just need to make sure no enhanced rings are on your character and no other salvage types are on your character. after you send each /mt usep command make sure to then send a /mt givep Empyrean Ring to (InsertMuleName) so you can imbue the next ring with ivory.
Re: Using Salvage on Items
Posted: July 9th, 2015, 12:23 pm
by yaroz
See the other post about ivorying rings for that section of my meta.
Re: Using Salvage on Items
Posted: July 10th, 2015, 4:57 pm
by Invictus
oh thanks guys for the tip.