I need some help figuring out why vtank consistently chooses Shadownether wand to imp/vuln/attack. I have a Life spec mage with void and missile, and for things where I want her to vuln and then either use an appropriate wand/bow to attack, she seems to whip out her Shadownether wand to vuln and...
Last post
After some brief testing, it was definitely choosing the shadownether wand to debuff with due to its listing in the items tab. Thanks Bob! This seems to be the case even if SwitchWandsToDebuff is true and the weapon dictated for the mob is not a wand.
So I'm helping a friend set up a basic route, this macro doesn't need to be in combat mode or cast any spells. It's just running a simple route recalling home and running into the apt.
My problem is I need him to interact with another player in trade mode. If he has a wand in his items list, he...
Last post
make sure follow nav min is 1.5 or higher if it is lower vtank tries to equip a wand and go into combat mode at every nav point
Trying to make additions to the Lootsnob profile and having a little difficulty figuring out Icon overlays for several different items? Is there a VT tool that gives me this info? Thanks.
Please see the screenshot below. Any idea why virindi tank is like this? I've never had this issue until this clean install. My first time playing on bootcamp on the retina iMac.
Notice how the text is cut off?
Go Arrow VSS is also messed up in that the atlas tab and anything under it shows...
I just returned to AC, and was looking to set up a loot profile.
I took lootsnob as a basis, and read somewhere that salvage bags now can be worth only up to 75k, which can be set-up in the 2nd tab of the loot profile editor.
However, this is not linked to 1 rule, but always to a specific...
Last post
sweet, I am following you on twitch, hope to see you hosting sometime in the future :)
If I have my loot profile set to loot IconUnderlay == 23308 will this also loot higher tier rares like the Leikotha's Tears and so on? Or does it only loot lvl 1 tier?
Last post
it will loot all rares, including rare pack but vtank will only be able to loot the rare pack if you have a packslot free.
I have battled with this issue for quite some time, when I go through a portal my AC client crashes.
It usually happens when I am using multiple accounts. I can sometimes run multiple accounts without issues.
So what things, logs, etc., should I look at or turn off so that I can minimize or...
Last post
By the way...My computer is pretty new, it is an Alienware Aurora, so I doubt it is the problem. I have noticed that it may be running too long and perhaps running out of memory. I will leave it on for weeks at a time, and have noticed that a quick reboot takes care of the problem. I'll blame it on...
Hello, Im trying to create a simple route, (not a meta) that will recall /ls, talk to Monroe and re-route back to a dungeon that all my toons are parked in.
I can do all this just fine until I get to monroe, then I stand there for eternity chatting with him until the end of days. I have the route...
Last post
The UseNPC in Vtank works as expected, just not as you would expect =p At least that's what V says, lol.
It keeps repeating in case it lagged, the npc was in a busy state, or you weren't actually near the npc when you used it (like when you run up to a door and have to use it 5 times to get it to...
Subject pretty much sums it up... In order for vtank to work for more than a second here and there, it requires AC be minimized. Anyone else run into this issue?
I have decal on while in game. When I kill it manually, I could see the killing blow message like : You smite drudge lurker!
But when I turn on macro and it doesn't show kill message at all so what can I do? :?:
Another question relate to vtank loot profile. You create vertical line by using...
Last post
VTank filtering kill messages is an artifact of old debugging. I never changed it because the game's filtering doesn't work for kill messages, and I hated having them in the main chat window. In the next version I am addressing this by adding a preset to VCS and removing filtering of kill messages...
What do I put in the loot profile to check for leather being applied? I have a loot profile for my pet mule, but I don't want to transfer stuff over that's had leather applied.
Last post
Yeah.. I looked through it and didn't see anything. I just wasn't sure if I was overlooking something.
I love the lootsnoob profile and have been able to modify it to suit quit a large range of toons and situations but now I am trying to level some toons with out creature until around 125.
I already have tank looting no wield majors but Is there a way to also get it to look for :
no wield armor...
Last post
I noticed that some loot has adja's blessing and others have adja's boon.. TY turbine for being consistent! hehe
Now I just need to understand the weapons and wands ratings formula better, would like to build loot rules for bellow 400 down to no wields but am not getting the math correct for...
Apologies if this is in the wrong forum, but I couldn't find a better place to post this.
I'm running into problems with the commands /mt vendor addbuy and /mt vendor buy. addbuy sometimes fails to add items completely (for example, /mt vendor addbuy Leather Basinet at a vendor that sells...
Last post
It would definitely be nice to have that feature, but Mag hasn't been in game for over 8 months.
Mag-Tools is open-source. You could make the changes if you have the ability, or know somebody who does.
This seems to be the Arsherons Call think tank . So I figured I would offer my help here.
I could provide servers and bandwidth hosted within a data center for a private AC server.
A friend of mine Owns a LA Based Data center with rented remote locations on the east coast and a couple in Asia.
He...
I run 6 accounts and on one of them Vtank will not start. Here is a link to what my vtank looks like at start up.
Here is the log information:
8/26/2014 7:55:09 PM -04:00
PC == null? False
C == null? False
VTank version: 0.3.1.151
Error: Value cannot be null.
Parameter name: key...
Last post
Hey Dm,
Thanks for the reply. I meant to come back and reply last night about 5 minutes after I posted. It seems that once I talk it (or write it) out, i start thinking of solutions :) I did part of your second suggestion. But it wasn't the Character_Server.x files that was the problem. It was the...
Hi all. Great little forum here with good information. Thanks for all the hard work helping and supporting people with this stuff. This is a lengthy post, my apologies. Just trying to be thorough and really figure this stuff out. I've been using virindi bundle for a little while now, but just...
Last post
One of your loot rules is looting lock picks. To find out, select a lock pick that was looted and type /vt testitem. It will tell you which rule you must edit.
This is the strategy I use to beat colosseum with the meta. I run with 1 War mage 1 Void mage 1 archer and 1 spec lifemage/trained Void, all 4 of which are summoners (Colosseum requires 583+summoning for debuffs). With this strategy summoning full time I get colosseum wins with 16-17 minutes...
Last post
Any chance you'd wanna save a profile of each of these for archer/mage/lifemage?
Nope, I wouldn't feel comfortable doing all the work. I listed all the necessary information for each creature type. Its much easier to setup than most would lead you to believe for almost every type of creature you...
I noticed my profiles were not properly ID'ing over max weapons seeing as I toggled them on from the editor. We figured out thanks to Magi and Hellswrath that after a fresh install it would ID only my OD+10 weapons. I wanted to loot lower OD weapons so I toggled on the rule and now it stops ID'ing...
Last post
When I ID something that is in the rules and is toggled on, it puts the green rule in front of it. When i toggle things on it doesn't put the green rule in front of it. I'm only guessing that its not properly identifying the item and it wont be picked up.
what do i need to set CorpseApproachRange-Max and/or CoprseApproachRange-Min to auto loot corpses that fall out of range like Tuskers? I've tried different ranges and nothing seems to work. Or is there another setting for that?
Strider
Last post
Thx Hellswrath pointed out to me changing Approach setting changes CorpseApproachRange-Max setting. I tried setting Approach to 10 and still would not loot the tuskers that fell just out of reach. Setting Approach to 15 did the trick.
What I want to do is attack certain mobs when they are further away then my normal attack range.
Been trying to use range> or range 10
range =10
name==Black Coral Golem && range>10
species==Golem && range>10
Ive also tried setting one particular mob at a range> and everything else at a range or...
Last post
Dmdtt that worked, thankyou very much. I don't want to say how long I been trying to get this working. The examples on the help page shows spaces (at least looks like they do) so I was using them.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
